Products

Easily and precisely adjust your shift lever the height you want it. Our All New Adjustable Shift Linkage stands out from the competition by using opposing threaded heim joints, this allows you to fine tune adjust the height of your shift peg without removing the linkage from your bike. ...

Easily and precisely adjust your shift lever the height you want it. All New Adjustable Shift Linkage stands out from the competition by using opposing threaded heim joints, this allows you to fine tune adjust the height of your shift peg without removing the linkage from your bike.  Fits '99-Current...

Made in U.S.A Billet 6061 Aircraft grade Aluminum Hard Anodized Black Includes ARP® Fastener made to THRASHIN® Exact Specifications Fits all Harley-Davidson® models Fits all Harley-Davidson® model Shift Levers & THRASHIN® Billet Shift Levers. Also works as brake pedal for THRASHIN® Softail Brake arm. ...

These 1" Shorty Shifter Pegs were designed to be 1" shorter than the original shifter tip length. They work great as the rear shift peg for bagger models, allowing you to use more of the rear of your floorboard. Made in U.S.A Billet 6061...

Speedway Shifter Peg Made in U.S.A Billet 6061 Aircraft Grade Aluminum Hard Anodized Black Finish Comes with one 5/16-24 x 7/8" SCHS Fits all Harley-Davidson® models Fits all Harley-Davidson® model Shift Levers & THRASHIN® Billet Shift Levers. Also works as brake pedal for THRASHIN®...

Made specifically to fit Thrashin Supply Risers Increase your Thrashin Riser Length 1" with these spacers 6061 Aluminum Made in USA Hard Anodized Black Comes with hardware -  4" long, Grade 8 Steel, 1/2"-13 Thread Type(Same as our risers), Zinc Yellow-Chromate Plated Head Head...

Made specifically to fit Thrashin Supply Risers Increase your Thrashin Riser Length 1/2" with these spacers 6061 Aluminum Made in USA Hard Anodized Black Comes with hardware -  3-1/4" long, Grade 8 Steel, 1/2"-13 Thread Type(Same as our risers), Zinc Yellow-Chromate Plated Head Head...

1 inch diameter bar fits stock Harley mounts and controls Drilled and slotted for internal wiring Knurled for maximum clamp grip Fly By Wire key holes allow newer style bike fitment (Cable throttle bikes will need to buy our TBW Handlebar Plug) Laser etched THRASHIN®...

Fitment: Dyna, FXR, Softail, Street Glide, and Road Glides(aftermarket bars)  Sportster 2009 and up  CNC Machined of 6061 Aluminum Comes in a pair of Left & Right ONLY! Comes with 12 Point ARP Hardware Made in The U.S.A

Fits 16-20 Baggers (FLHT/FLHX/FLTRX/FLTRX/FLTRU/FLTRK) 15 FLHTCUL/FLHTKL Machined from 6061 billet aluminum Triple Nickel Plated Chrome Finish Uses stock gasket and hardware Made in America

THE ONLY REAL ADJUSTABLE BRAKE ARM FOR YOUR BAGGER, from Thrashin Supply.  For 2014 to Current FLHT / FLHR / FLHX / FLTRX / FLTRU / FLHTCUTG Stop riding with an uncomfortable brake position. Up to 12 Degrees of rotational adjustment, moving your pedal...

Increase your Apex Floorboard ground clearance by lifting your boards a half inch with this lift kit. Made in USA Hardware included Billet 6061 Aluminum Hard Anodized Black for increased strength

The Apex Floorboard Tail Extension adds 1.2" and a 5 Degree angled tail to the back of your Apex Floorboards for increased grip area closer to the rider.  Made in the USA Billet 6061 Aluminum Hard Anodized Black for increased strength in material and...

The Apex Floorboard Tail Extension with 1/2 Lift Kit, adds 1/2 Lift to your boards with 1.2" and a 5 Degree angled tail to the back of your Apex Floorboards for increased grip area closer to the rider.  Made in the USA Billet 6061...

The All-New Apex Floorboard, these boards were designed to have maximum ground clearance while not sacrificing the comfort of floorboards on your bike. We did this by making these boards fit perfectly over the stock HD mounts with a total length of 10" and only...

• Constructed of Aerospace 6061 Aluminum• Full Knurl Design for maximum traction• 4.5" W x 2.75" T• Designed to mount to stock brake pedal arm in conjunction with the Thrashin Brake Pedal Pad Mount (sold separately)  • Hardware included• Made in Los Angeles, CA• Pairs...

Billet 6061 Aircraft grade Aluminum Completely knurl board for ultimate grip and control Made in Los Angeles, CA  Match our THRASHIN Bagger Floorboards Requires Mounts found on Ultra Glides HD Part # 52719-10 SUPPORT KIT,

Slim profile designed with V-Twin motorcycles in mind Fully textured grip reduces vibration & provides extra dexterity Durable proprietary compound

This Brake Pedal Pad Mount is designed to work with the stock style brake pedal pads with the Thrashin Supply Co Adjustable Bagger Brake Arm for your Harley-Davidson Bagger. Black is Hard Anodized Chrome is Triple Layer Chromed Hardware: 3/8-16 x 7/8" (to mount to...

Aircraft Grade 6061 Aluminum Platform Adjustable 360° on Clevis Made in the U.S.A.