Lighting & Electrical

Feature billet aluminum housings Measure 1" wide x 1/2" tall Single-function high-intensity amber LEDs - may be used as marker lights OR turn signals/blinkers (not both) Amber or smoke lenses Wire leads are 36" long Can be mounted using the mirror stems or mirror...

Handlebar Wiring Kits from LA Choppers make extending your handlebar wiring a breeze! Each kit includes factory terminals on one end - just cut the other side to length and attach to your factory controls. For CAN BUS models only! Saves time by streamlining...

Black taillight base plate

Aluminum light bar with 6 high power LEDs behind a selective yellow lens produce a super bright beam pattern to increase visibility and minimize glare from harsh weather and road conditions like rain, fog, and dust Mounting bracket included for securing to the triple...

Direct replacement for OEM circuit board

Extension block required for mounting on models with 39mm forks

Universal wiring adapter allows for plug and play installation of High Power LED Driving Light Bar (2120-2320, sold separately) Includes terminal connectors for battery hookup with built in push button switch to operate the light bar Short circuit protection and terminal overload protection Push...

Covers the hole in the rear fender strut cover when removing the rear turn signals.

100% plug-and-play Adjustable, Normal and Max Settings (work with all combinations of LEDs) No RF Noise Spread Spectrum Technology 100% waterproof No load, no heat, recycles 90% of power Model Fitment: 2050‑0218: 1996-2010 Softail (Except Rocker), 1997-2011 Dyna, 1999-2003 Sportster, 97‑13 FLH/FLT (except 10‑13 FLHX/​FLTRX), 00‑10...

Factory taillight circuit boards on 2018-2021 Harley-Davidson® Low Rider (FXLR) and Low Rider S (FXLRS) models do not provide turn signal power required for proper function of Integrated LED Taillights with built in turn signals. This plug and play harness provides turn signal power...

These light housings fit over the top of the OE H-D Fender Struts. Fitments available for Breakout, Low Rider(s), Sport Glide, Heritage, Deluxe, Street Bob, and Slim. Totally cleaning up and transforming your stock bike, without sacrificing function, or safety. CNC machined aluminum housing with super bright...

ProBEAM® Integrated taillight combines 5 LED running light pipes with full contrast red brake LEDs with built in left and right amber auxiliary turn signals. The low profile design protrudes only two inches from the stock taillight baseplate for a sleek, custom, all-in-one solution for...

Direct plug-in digital instrumentation system for all 2014 and newer Harley Davidson Street Glide, Road Glide, Ultra Classic, Tri-Glide and CVO touring models.    Dig into the 31 illumination colors; independently select colors for the main gauge reading, message center information, bar-graph readouts and gauge...

Lightweight aluminum radius license plate mount adds a custom look to the rear fender Eliminates stock rear turn signal bar and lights LED illuminated radius plate frame included Mounting hardware included Load equalizer may be required Fits: 1997-2013 Electra Glide, Ultra Limited & Road...

Complete front and rear turn signal conversion kitswith smoke lenses in front and red lenses in rear Front turn signals feature a Dynamic Ringz ProBEAM outer ring of 24 automotive-grade white DRL LEDs, inner circle of 12 high-power automotive-grade amber turn signal LEDs When...

Converts rear turn signals to run-brake-turn Works with LEDs or incandescent bulbs Ten user-selectable built-in brake light strobe/flash patterns (user can also select no strobe/flash on brake) Ten user-selectable running light intensities allow user to match the running light brightness of turns to center...

10-user selectable flash/strobe patterns Over-current/thermal/short circuit/reverse wiring protection 84W, 12V system Sealed weather-tight case Fits: 2014-2021 FLHTCU/FLHTCUL/FLHTK/FLHTKL/FLHX/FLHXS/FLTRX/FLTRXS (except FLHXSE CVO) with rear LEDs NOTE: Applies brake flash/strobe pattern to rear fender brake light (Does not flash Tour-Pak). NOTE: Must be used with rear LEDs only;...

33 super bright automotive grade LEDs in nine running light tubes per unit Easily installed with included adapters Fits: 2014-2023 Harley Electra Glide, Road Glide and Road King (FLHT/FLTRU/FLHR) CVO models require painted filler panels to be removed for installation. Road King Special (FLHRS),...

Super small, amazingly bright White running light and full contrast amber front turn signal Engineered in Germany with SMD-LED technology Includes mounting brackets and connectors Some applications may require the use of a load equalizer. For 22+ FXLRST

White run light and full super small, amazingly bright contrast amber turn signal with smoked lenses Engineered in Germany with SMD-LED technology The housing is CNC machined from billet aluminum Some applications may require the use of a load equalizer. May fit other cable...