Dyna

The ORIGINAL Pre Load Adjuster for Harley-DavidsonCNC machined from 6061 aluminum.With almost an inch of preload adjustment, these fork caps will replace your stock ones and allow you to fine tune your front suspension. With a turn of the adjuster, up or down, you...

Precision CNC machined forged aluminum Increased structural strength Dimensional stability Freedom for internal porosity Separate scavenge sections for flywheel cavity and cam chest scavenge each area more efficiently with no interference Gerotors are designed to tolerate more pinion shaft runout without damage Cam chest...

Increased filter area, combined with an air horn like radiused inlet and unique S&S stinger cone to allow smoother faster airflow for more power. Add a stylish, high-performance look with a number of good looking available covers. Kit includes a backplate, filter element, top...

Complete 110" Big Bore and Cam Chest Kits!  Upgrade to the biggest bolt-in performance kit S&S makes for 1999-2017 Harley-Davidson® big twins (except 2006 Dyna® models and 2017 touring models). Get everything you need in one package. Contains an S&S 4” big bore cylinder...

Wrapped in genuine Renthal rubber. Throttle side doubles as a Aluminum throttle tube upgrade for more positive feel. Left side grip attaches with hidden set screws for a no mess easy installation. Available in chrome or black anodized finish. Sold in pairs. Made in...

True sport performance shocks Feature a high-pressure monotube with deflective disc-damping technology, hand threaded pre-load and rebound adjustment Linear rate spring allows riders to fine tune the damping and consistently withstand extreme temperature ranges and heavy loads Engineered jounce bumper and cup also help...

Black finish only Fits 1991- 2017 Dyna Models NOTE: Heavy Duty applications are recommended for 500lb. + rider and passenger total weight.NOTE: OEM PART #’s 54666-08 (2), 7880 (2) and 8185 (2) needed for 91-05 models.   PRODUCT DESCRIPTION Legend's touring specific spring rates...

Fits 1991-2017 Dyna Models NOTE: Heavy Duty applications are recommended for 500lb. + rider and passenger total weight.NOTE: OEM PART #’s 54666-08 (2), 7880 (2) and 8185 (2) needed for 91-05 models.   PRODUCT DESCRIPTION Available in Black, Clear Anodized or Gold. Legend's touring...

Double walled 1 - 1/4" MX style bars made of USA high strength steel Solid 1-Piece welded design Multiple straight riser heights at 8"/10"/12"/14"/16" Pullback available in 8"/10"/12"/14"/16" as well 30.5" overall width 3.5-inch on-center risers Designed for internal wiring 

Double walled 1 - 1/4" MX style bars made of USA high strength steel Solid 1-Piece welded design Pullback available in 8"/10"/12"/14"/16" as well 2-inches of pullback 30.5" overall width 3.5-inch on-center risers Designed for internal wiring 

Fits 2006-17 Dyna Models (except FXDWG / FXDF) 49 MM NOTE:  2016-17 Dyna Lowrider S models require separate purchase of (1) OEM Part # 45500118 lower retaining bolt to be used in the LH Fork leg.   PRODUCT DESCRIPTION Available in standard 49mm models...

The Kraus Isolated Riser is the solution for bad handling bars.Utilizing the supplied billet bushings, the Isolated Riser is designed to be solid-mounted to the top triple tree. This creates a much more rigid bar setup, allowing for far greater use of your bike's suspension...

Fully electronic, lighter weight, global input (100-240Vac 50-60Hz), fully sealed, more advanced desulfation and maintenance program Suitable for all types of 12V lead-acid batteries of rated capacity from 3 to 50 Ah Diagnoses sulfated battery condition Recovers severely neglected batteries from as low as...

Die-cast construction with a domed design Includes mounting hardware NOTE: Does not fit 16-20 Touring, 18 FLSB. See alternate part.

Fits 99-13 FL, 06-17 FXD Replace your "Plain Jane"-looking, chromed "sheet metal stamped" cap with one of these trick steering stem nuts Aircraft-inspired design CNC-machined from billet aluminum Replaces the nut beneath the existing screw-on cover Installs in minutes Made in the U.S.A.

PREMIUM LIGHT PIPE DESIGN FOR RUN & BRAKE   ProBEAM® LED Taillights have been engineered with the highest quality automotive LEDs and modern light pipe design! Custom Dynamics® premium line of aftermarket LED motorcycle taillights provides increased side visibility to maximize safety for Harley-Davidson®...

Fits 01-17 Twin Cam without cam position sensor Replaces OEM Part# 25369-01 Matte Black Finish

The MLX-2000 series instruments fit stock 4 ½- 5” Fat Bob tank dashes found on Road King, Softail and various Dyna models with the large, tank-mounted speedometer.    Choose from a black or chrome bezel to start, then dig into the 31 illumination colors; independently select colors for speed...

The MLX-3000 series instruments fit stock 3 3/8" tank and handlebar mounts found on Sportster, Rocker and various Dyna models.   Choose a black or chrome bezel to start, then get lost in the 31 illumination colors; independently select colors for speed reading, message center information, bar-graph...

Fits 06-17 FXD, 07-17 FXS/FXST Replaces OEM Part# 34564-90B High-quality, levers are excellent OEM replacements Strong, die-cast construction is reinforced for extra strength Shift pegs sold separately