-
Vendor: S&S CycleStuds 4140 Chrome Moly studs, oil quenched and tempered to 39-44 HRC Rounded thread roots, rather than flat, improving fatigue strength Positive stop shoulder allows for consistent installed height 180,000 psi tensile strength Reusable 14% increase in strength over stock Heat treated 8640 steel...
- $219.95
- $219.95
- Unit price
- per
-
Vendor: S&S CycleCrafted from strong, billet 6061 T6 aluminium Patent pending dual spray technology for uniform piston cooling Revised spray locations for more effective cooling Anodized in S&S performance blue Shortened nozzle for increased rod clearance Includes all necessary hardware and gaskets
- $81.95
- $81.95
- Unit price
- per
-
Vendor: FeulingEnsures the cross sump port is wide open and allows the oil pump to pull as much as possible from the sump
- $12.95
- $12.95
- Unit price
- per
-
Vendor: FeulingBULLETPROOF OE+ CONVERSION CAMCHESTS!FEULING OE+ complete hydraulic conversion camchest kits include all necessary components from top to bottom of the camchest conveniently packaged under 1 part # at budget friendly pricing. These combination kits not only ensure each individual part is designed to work...
- $1,669.95
- $1,669.95
- Unit price
- per
-
Vendor: DynatekCompletely self-contained so entire unit hides under the cam cover for a clean look on custom bikes Single-fire operation down to zero rpm for easier cranking and kicking Will operate in all combinations of single-fire or dual-fire with single-plug or dual-plug heads Ten advance...
- $456.65
- $456.65
- Unit price
- per
-
Vendor: Comp CamsVELVA-RIDE™ FRONT MOTOR MOUNTS • Available in a black or polished finish• Reduces engine vibration by 20% to 50%• Sold each• Made in the U.S.A.
- From $165.95
- From $165.95
- Unit price
- per
-
Vendor: S&S CycleKit includes four S&S Quickee pushrods, four pushrod covers and O-rings Pushrods are manufactured from chromoly steel for superior strength Pushrod covers have a chrome-plated finish Kit does not require rocker box removal Made in the U.S.A.
- From $309.95
- From $309.95
- Unit price
- per
-
Vendor: S&S CycleThe S&S Cycle Precision Tappets are a high performance replacement for both our previous standard and premium lifters for M8, Twin Cams and late Sportster® applications. Each Precision Tappet is hand assembled to exacting tolerances and designed for quiet operation and rapid pump up and...
- $279.95
- $279.95
- Unit price
- per
-
Vendor: FeulingOIL PUMP GEAR ALIGNMENT TOOLAlign the oil pump gear flats with the flats of the crankshaft.Feuling recommends assembling the camplate, oil pump, camshaft etc together on the bench, lining up the oil pump gear flats with crankshaft flats and installing the complete assembly into...
- $44.95
- $44.95
- Unit price
- per
-
Vendor: FeulingMachined from billet 6061 aluminum with square surfaces, promoting excellent umbrella valve sealing, longer main breather exit nipples with dual O-rings to promote better breather system sealing
- $479.95
- $479.95
- Unit price
- per
-
Vendor: Thrashin SupplyFits '18-later FLSB and '19-later Softail® models. Also fits '18 Softail® models equipped with Narrow Profile Primary Cover Triple Nickel Plated Chrome Finish Uses Stock Gasket and hardware. Made in America
- $139.95
- $139.95
- Unit price
- per
-
Vendor: Thrashin SupplyFits 16-20 Baggers (FLHT/FLHX/FLHX/FLTRX/FLTRU/FLTRK)/ 2015 FLHTCUL/FLHTKL Machined from 6061 billet aluminum Triple Nickel Plated Chrome Finish Uses stock gasket and hardware Made in America
- $169.95
- $169.95
- Unit price
- per
-
Vendor: Thrashin SupplyFITS 16-20 BAGGERS (FLHT/FLHX/FLTRX/FLTRX/FLTRU/FLTRK) ( 2015 FLHTCUL/FLHTKL) Machined from 6061 billet aluminum Triple Nickel Plated Chrome Finish Uses stock gasket and hardware Made in America
- $169.95
- $169.95
- Unit price
- per
-
Vendor: Thrashin SupplyFits 16-20 Baggers (FLHT/FLHX/FLTRX/FLTRX/FLTRU/FLTRK) 15 FLHTCUL/FLHTKL Machined from 6061 billet aluminum Triple Nickel Plated Chrome Finish Uses stock gasket and hardware Made in America
- $179.95
- $179.95
- Unit price
- per
-
Vendor: Arlen NessOil pressure gauge kits for M8 engines CNC machined billet aluminum gauge bracket Oil gauge features a stainless steel gauge housing & glass lens, each gauge is filled with vibration dampening glycerin for easy viewing when riding Braided stainless steel oil hose for a...
- $199.95
- $199.95
- Unit price
- per
-
Vendor: S&S CycleHeat Treated 8640 Steel 200,000 psi Ultimate Tensile Strength 14% increases in strength over stock Stronger material than stock Head bolts Durable Black Oxide Coating 9/16" 12 point head with integral washer Formed threads Cold Formed Head Reusable
- $152.95
- $152.95
- Unit price
- per
-
-
Vendor: S&S CycleReplace broken or worn OEM pieces with stronger, more durable S&S performance parts Direct replacement for stock parts Hardened and surface ground for ultimate precision and durability
- $173.95
- $173.95
- Unit price
- per
-
Vendor: S&S CycleA must for your M8 build! Extend the life of your cylinder heads Prevent damage to Rocker Arm Towers Install studs and safely re-torque nuts Black Oxide Finish 12 pt Nuts
- $122.95
- $122.95
- Unit price
- per
-
Vendor: S&S CycleFits 1984-'18 HD® big twin engines, 1986-'19 HD® Sportster® models, and 1994-'02 Buell®. Our forged steel roller rocker arms were designed for superior strength and to eliminate the failure-prone stress areas found in some other rockers. S&S® roller rockers are forged from 8620 steel, heat-treated, and then shot-peened...
- $652.95
- $652.95
- Unit price
- per
GET 5% OFF YOUR FIRST ORDER
Join our mailing list to stay in the know on new releases, special offers & 5% off your first order!