ProBEAM® Integrated taillight combines 5 LED running light pipes with full contrast red brake LEDs with built in left and right amber auxiliary turn signals. The low profile design protrudes only two inches from the stock taillight baseplate for a sleek, custom, all-in-one solution for the rear fender. Replacement gasket and nylon washers included for easy plug and play installation into OEM taillight circuit board. Available with a Red or Smoked lens with optional license plate illumination window. All options are DOT/SAE Compliant. Red lens option with No Window is ECE Compliant.
Simple plug and play installation on 1999-2013 Harley-Davidson® Sportster models (Except XL1200N, XL1200X, XL1200V or XL883N); 2014-2019 XL883L & XL1200T, 1999-2017 Dynas® (Except 2009-2017 FXDB, 2010-2017 FXDWG), 1999-2017 Softails® (Except FXS, FLS, FXSB, FXSBSE, FLSTN, FLSTNSE, FXCWC, 2010 FLSTSE2), 2018-2020 Heritage Classic (FLHC), 1999-2013 Electra Glide, Ultra Classic, Ultra Limited models (including CVO™), Road King Classic (FLHRC), Road Glide Ultra (FLTRU), Road Glide Ultra CVO™ (FLTRUSE), 1999-2009 Road Glide Standard (FLTR), 2006-2009 Street Glide (FLHX), 1999-2020 Road King® (FLHR), 2014-2015 Limited CVO™, 2015 Road Glide® Ultra CVO™ (FLTRUSE), 2019-2020 Electra Glide® Standard (FLHT). Replacement for OEM Part 68245-03.
2018-2020 Harley-Davidson® Low Rider (FXLR) and Low Rider S (FXLRS) models require Low Rider Integrated Taillight Adapter Harness for proper operation (sold separately).
Important: DOT & SAE Compliant run and brake. Integrated turn signals are intended for use as auxiliary lighting only. Integrated turn signals are NOT intended to replace any original equipment lighting installed on the vehicle and should not be used for that purpose. This product must be wired so that it does not interferewith any original equipment lighting.
Not Recommended for inverted installation on 01 FXDWG2, 02 FXDWG3, 99-08 FXDWG, 2008-2013 FXDF, 99-09 FXSTB, 08-11 FLSTSB, 99-10 FXSTC, 99-07 FXST, 99-06 FXSTS, 09-12 XR1200 & XR1200X
Not compatible on Trike models, on models with Run/Brake/Turn module installed or on CanBus models with Brake/Turn BCM programming.