Kraus Radial Caliper Titanium Hardware Kit

Use these kits to properly space and mount radial brake calipers to Kraus Caliper Mounts.

The 12-point high grade Anodized G5 Titanium flanged bolt allows for increased torque and holding power and corrosion resistance while decreasing weight and offering premium performance.

2.5mm Aluminum Spacers stack to form all commonly needed spacing. For use with aftermarket radial calipers.

If using any OE calipers we recommend setting the caliper in place and measuring for proper spacing.

Each kit will mount one caliper.

• NOTE:
• These bolts kits are designed to run with Kraus caliper mounts.
• If you're not running Kraus radial caliper adapter's, make sure the thread pitch of your mounts are M10-1.25. 

60mm kit - UN-BR-60-A/P

• Two Titanium 12pt. bolts (M10 x 1.25 x 60mm).
• 8 Stackable 2.5mm Spacers.
• Allows for a total caliper spacing of 0mm-10mm.
• Use with DYNAMOTO RADIAL CALIPER MOUNTS and 11.5" or 11.8" brake rotors.

70mm kit - UN-BR-70-A/P

• Two Titanium 12pt. bolts (M10 x 1.25 x 70mm).
• 14 Stackable 2.5mm Spacers.
• Allows for a total caliper spacing of 10mm-18mm.
• Use with REAR RADIAL CALIPER MOUNTS and 11.5" or 11.8" brake rotors.
• Use with DYNAMOTO FRONT RADIAL CALIPER MOUNTS and 12.6" (320mm) brake rotors.
• Use with KRT RADIAL CALIPER MOUNTS and 11.8" brake rotors.

80mm kit - UN-BR-80-A/P

• Two Titanium 12pt. bolts (M10 x 1.25 x 80mm).
• 22 Stackable 2.5mm Spacers.
• Allows for a total caliper spacing of 20mm-28mm.
• Use with KRT RADIAL CALIPER MOUNTS and 12.6" (320mm) brake rotors.
• Use with FRONT AXIAL TO RADIAL CALIPER MOUNTS and 12.6" (320mm) brake rotors.