Products

100% plug-and-play Adjustable, Normal and Max Settings (work with all combinations of LEDs) No RF Noise Spread Spectrum Technology 100% waterproof No load, no heat, recycles 90% of power Model Fitment: 2050‑0218: 1996-2010 Softail (Except Rocker), 1997-2011 Dyna, 1999-2003 Sportster, 97‑13 FLH/FLT (except 10‑13 FLHX/​FLTRX), 00‑10...

The NEW Softail Brake Linkage is designed and manufactured in house at Speed Kings.  With Left and Right hand thread taps once installed you can just spin the center to adjust your brake lever and then lock down the jam nuts.  COMES WITH ARP...

THE ORIGINAL 39mm Preload Fork AdjusterFits: 87-94 FXR, 91-05 FXDL and FXD, and 88-up XL models. Will not fit, 1200S, and 00-05 FXDX/FXDXT The Speed Merchant has manufactured our 39mm Fork Adjusters for speed and beauty.CNC machined out of 6061 aluminum with precise craftsmanship,...

The ORIGINAL Pre Load Adjuster for Harley-DavidsonCNC machined from 6061 aluminum.With almost an inch of preload adjustment, these fork caps will replace your stock ones and allow you to fine tune your front suspension. With a turn of the adjuster, up or down, you...

Brackets have a 108 mm caliper mounting hole spread and will work with most radial-mount calipers (some spacing and shimming may be required) Brackets allow use of modern radial brake calipers for ultimate braking performance without high costs Made in the U.S.A. Include shims...

Brackets have a 108 mm caliper mounting hole spread and will work with most radial-mount calipers (some spacing and shimming may be required) Brackets allow use of modern radial brake calipers for ultimate braking performance without high costs Made in the U.S.A. Include shims...

• Eliminates that soft spongy feel in your handlebars. • Works great with tall bars. • Available in machined or black finish. • Uses stock riser hardware. • Fits most 84-15 HD models. FXD, FXR, FXST, FLST, and XL.  (Except Deuce and 04-up XL)...

• Eliminates that soft spongy feel in your handlebars. • Works great with tall bars. • Available in machined or black finish. • Uses stock riser hardware. • Fits 18-20 Softail & Touring Models

Required when mounting OEM or optional saddlebags with SuperTrapp Fatshot 2:1 or Kerker Bootlegger exhausts NOTE: For models equipped with OEM or optional saddle bag kit running SuperTrapp FatShot 2:1 or Kerker Bootlegger exhaust.

Direct replacement for OEM circuit board

Direct replacement for OEM taillight baseplate Low Rider ST and El Diablo models require OEM rear turn signals to be removed for installation and may require additional taillight wire harness (sold separately).

Billet 6061 Aircraft Grade Aluminum Hard Anodized Black Finish Match our THRASHIN Apex Floorboards Requires HD OEM Rear Passenger Board Mounts Part #50500042 - Passenger Footboard Support Kit Made in U.S.A

Fits Dyna, Sportster, FXR, and Softail models Billet 6061 Aircraft grade Aluminum Hard Anodized Black Finish Stainless Steel Clevis for Dyna/FXR/Sportster/Touring/Softail Aluminum Clevis for M8 Softail Model Made in U.S.A Will not work on 2018 and up M8 Softail Rear. Hits on primary.

Fits '91-'17 Dyna options for Mid Controls & Further Forward Mid   You can pair the shift arm with any TSC Shifter Tips ARP Hardware Included Hard anodized black finish Made in U.S.A.

Dial in your Softail Foot Controls with our THRASHIN® Billet Shift Lever. Now available in stock length and 1" shorter.  Fits '18-Current Softail with Mid Controls You can pair the shift arm with any of our TSC Shifter Tips ARP Hardware Included Hard anodized...

Thrashin Supply Billet Shift Lever. Fits '88-Later Touring, FXR, '86-'17 FL Softail, and '08-later Trike models. Shift arm is available in stock length 6.25", and a 1" shorter arm 5.25". You can pair the shift arm with TSC Shifter Tips.  Made in U.S.A. NOT SOLD IN...

The EZ Shift Lever improves the leverage by 25% making it easier to shift gears and find neutral. Our testing showed it requires roughly 13 ft/lb to move your shift peg, with our EZ Shift that number drops to 10 ft/lb on average.  Individual...

Easily and precisely adjust your brake arm height to where you want it. The all-new Softail brake linkage stands out from the competition by using opposing thread Heim joints, this allows you to fine tune the height of your brake arm without having to...

All-new Softail Brake Arm Increased Lean Angle Over Stock Brake Arm Billet 6061 Aluminum Hard Anodized Black Finish Delron Scrape Plate Made In U.S.A Fitment: 2018 -2023 M8 Softail with Mid Controls Does not come with brake pedal / shifter peg. Must purchase brake...

P-54 Billet Shifter Peg Made in U.S.A Billet 6061 Aircraft Grade Aluminum Hard Anodize Black Finish Comes with one 5/16-24 x 7/8" SCHS Fits all Harley-Davidson® models Fits all Harley-Davidson® model Shift Levers & THRASHIN® Billet Shift Levers. Also works as brake pedal for...